1. Karfe tef sulke na USB
1. Tef ɗin ƙarfe ya kamata ya dace da buƙatun YB / T 024-2008 ”Tape ɗin Karfe don igiyoyi masu sulke”.An lulluɓe da sulke na tef ɗin ƙarfe na ƙarfe guda ɗaya tare da tef ɗin bakin karfe mai nau'i biyu tare da giɓi da sutura, kuma kebul ɗin multi-core galvanized biyu-Layer ko fentin karfe.Don nannade tare da rata da murfi, kauri na tsiri na ƙarfe ya kamata ya dace da buƙatun teburin tsari, kuma mafi ƙarancin madaidaicin kauri na ƙarfe bai kamata ya zama ƙasa da 90% na ƙimar kauri na karfe da aka ƙayyade a cikin teburin tsari ba.
2. Ya kamata a nannade sulke na tef ɗin ƙarfe biyu a cikin tazarar karkace ta hagu, kuma tazarar ɗin bai kamata ya fi 50% na faɗin tef ɗin ƙarfe ba, kuma tazarar da ke tsakanin tef ɗin ƙarfe na ciki ya kamata a rufe shi da tabo. tef ɗin ƙarfe na waje kusa da tsakiya.
3. Ba a yarda a yi amfani da Layer na anti-tsatsa a saman filin karfe ba yayin aikin nannade.Ya kamata abin rufewa ya zama zagaye da matsewa, kuma ba dole ne a murƙushe tsiri na ƙarfe ko ya sami gibi ba.Ana yin welded ɗin ƙwanƙolin karfe da injin walƙiya tabo, gaɓoɓin sun yi lebur, kuma ana goge haɗin gwiwa tare da wakili mai hana lalata.
4. An haramta sosai ga fashewar ƙarfe a gefen ɗigon ƙarfe don shiga cikin rufi ko kube.
5. An haramta sosai a yi amfani da ɗigon ƙarfe daban-daban na kauri da faɗinsa daban-daban don haɗa su don yin sulke.
6. An ƙayyade nisa na tsiri na ƙarfe a cikin teburin da ke ƙasa.Nisa da aka ƙayyade a cikin tsari shine matsakaicin nisa, kuma ana ba da izinin filayen ƙarfe kunkuntar.
2. Karfe waya sulke na USB
1. Galvanized karfe waya kamata hadu da bukatun na GB / T3082-2008 "Galvanized Low Carbon Karfe Waya for Armored Cables", da kuma diamita na karfe waya kamata hadu da dacewa bukatun na sulke tsari.
2. The nadi shugabanci na karfe waya makamai ne hagu, da kuma adadin karfe wayoyi ya kamata a ƙara daidai ko rage a kan tushen da sulke tsari dokokin bisa ga takamaiman halin da ake ciki, don tabbatar da cewa jimlar tazarar na karfe waya nada. bai kamata ya zama mafi girman diamita na waya na waya na karfe ɗaya ba, kuma bisa ga ainihin halin da ake ciki, zaɓi girman ƙirar da ya dace don tabbatar da cewa wayar ta kasance mai ƙarfi da santsi bayan yin sulke.
3. Dole ne a haɗa haɗin haɗin waya na ƙarfe da ƙarfi.Bayan walda, su zama ƙasa kuma a zagaye.Ba a yarda kusurwoyi masu kaifi ko busa ba.Ana barin diamita na waje na haɗin gwiwa ya zama ɗan ƙaramin girma fiye da diamita na waje na waya na ƙarfe, amma bai wuce 15% na diamita na waje na yau da kullun ba.Maganin rigakafin lalata.
3.Wasu bukata
Bayan Armored da waya cores ya kamata a cika da tsari rikodin takardar ga kowane tire, da kuma stacked neatly a batches bisa ga bayani dalla-dalla.
Yanar Gizo:www.zhongweicables.com
Email: sales@zhongweicables.com
Wayar hannu/Whatspp/Wechat: +86 17758694970
Lokacin aikawa: Afrilu-14-2023
